BLE & BLNE

 

Stöd Richard Ströms ärende med några futtiga kronor.

Gärna med mer än så....

 

Please - no questions about your old guns

Snälla - inga vapenfrågor

 Husqvarna Hammerless Shotguns - Boxlock Models

310 serie

The model 310 was normally made in 8 different versions in engraving and level of quality: 310, 310A, 310B, 310C, 310D, 310E (Eckermann), 310Lyx (Luxury model). The 310 is normally not engraved at all, the other engraving patterns is more developed step by step except for 310E which is a 310Lyx with very little engraving.

310X is a special version of the 310B for pigeon shooting - this models always have 2 3/4” chambers.

310_ barrels of Swedish Steel
310_S barrels of Swedish Special Steel
310_N barrels of Swedish Antioxid Steel

Normally N-barrels are regarded as the best, S-barrels as second and Swedish Steel are normally rather boring with thick heavy barrels. Ejectors on request.

Stock options: english straight stock or more German style pistol grip.

Gauge: 12, 16 or 20. Chamberlength 2 1/2” before gun no 165700, 2 3/4” after.

All versions have Purdey slide and Greener crossbolt. The design is very close to the Anson-Deeley boxlock with overlaying safety sears.

Models with a J in the modelname was made for the Danish market.

 

310A and 310AJ

These models were made from 1912 to 1942, totally 5500 made in 12 bore, 2310 in 16 bore and 210 in 20 bore.

Barrels of Swedish steel, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard, other lengths on order such as 80 cm, 82 cm and 90 cm. Ejectors on order.

J models was made for the Danish market, with 65 cm barrels choked to improved.

 

310B and 310BJ

These models were made from 1912 to 1940, totally 130 made in 12 bore, 40 in 16 bore and 4 in 20 bore.

Barrels of Swedish steel, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard, other lengths on order such as 80 cm, 82 cm and 90 cm. Ejectors on order.

 

310C and 310CJ

No picture available

These models were made from 1912 to 1942, totally 50 made in 12 bore and 10 in 16 bore.

Barrels of Swedish steel, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard, other lengths on order such as 80 cm, 82 cm and 90 cm. Ejectors on order.

310S

No picture available

This model was made from 1949 to 1951.

This model was made from 1912 to 1942, totally 50 made in 12 bore and 10 in 16 bore.

Barrels of Swedish Special steel, 70 cm long. Ejectors on order.

 

310AS

This model was made from 1912 to 1949, totally 8900 made in 12 bore, 670 in 16 bore and 120 in 20 bore.

Barrels of Swedish Special steel, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

J models was made for the Danish market, with 65 cm barrels choked to improved.

310BS

This model was made from 1912 to 1942, totally 825 made in 12 bore, 220 in 16 bore and 60 in 20 bore.

Barrels of Swedish Special steel, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

310CS

No picture available

This model was made from 1912 to 1949, totally 215 made in 12 bore, 220 in 16 bore and 6 in 20 bore.

Barrels of Swedish Special steel, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

 

310AN

This model was made from 1931 to 1949, totally 490 made in 12 bore, 40 in 16 bore and 10 in 20 bore.

Barrels of Swedish Nickelsteel Antioxid, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

 

310BN

This model was made from 1931 to 1942, totally 45 made in 12 bore, 15 in 16 bore and 5 in 20 bore.

Barrels of Swedish Nickelsteel Antioxid, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

 

310CN

No picture available

This model was made from 1931 to 1949, totally 10 made in 12 bore and 10 in 160 bore.

Barrels of Swedish Nickelsteel Antioxid, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

310DS and 310DN

310DS was made from 1913 to 1940, 310DN was made 1931 to 1939. Note that this model has ears on the action.

For 310DS totally 185 made in 12 bore 25 in 16 bore and 10 in 20 bore, the number made 310DN is unknown but should be considerable lower than for 310DS.

310DS has barrels of Swedish Special Steel, 310DN has barrels of Swedish Nickelsteel Antioxid, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

310X and 310XN

310X was made from 1931 to 1939, 310XN was made 1914 to 1941. Pigeon gun, but was made as a skeet version 1937 to 1946.

For 310X totally 235 was made in 12 bore only, for 310XN totally approx. 10 was made in 12 bore only. Both guns has 2 3/4” chambers.

310X has barrels of Swedish Special Steel, 310XN has barrels of Swedish Nickelsteel Antioxid, from 72 cm length and 75 cm length in some case. Ejectors on order.

The action and barrels are stronger and hence heavier than other models in the 310 serie.

 

310E

This model was made from 1918 to 1952. Note that the action has ears and always with ejectors. Made after specifications by the first Royal Shooting Master (förste Hovjägmästare) E von Eckermann.

This is more or less a 310Lyx with a very limited engraving. Totally 320 made in 12 bore, 10 in 16 bore and 15 in 20 bore.

 

310Lyx

This model was made from 1913 to 1949. Note that the action has ears and always with ejectors.

For 310DS totally 185 made in 12 bore 25 in 16 bore and 10 in 20 bore, the number made 310DN is unknown but should be considerable lower than for 310DS.

310DS has barrels of Swedish Special Steel, 310DN has barrels of Swedish Nickelsteel Antioxid, from 65 cm length to 90 cm long. 65, 68, 72 and 75 cm length as standard. Ejectors on order.

Totally 190 made in 12 bore, 10 in 16 bore and 10 in 20 bore.

 

210-serie

210

No picture available

This model was made from 1939 to 1940, totally 410 made. A cheaper version that was made to take up the lower segment, but without success so the model was dropped after a very short time.

The model has no engraving and have Purdey slide and Greener crossbolt. Only made in 12/70 with barrels in Swedish Steel.

 

610/615-serie

This model replaced the 310 during from 1949 to 1952 pending on model, all models has Purdey slide and no Greener crossbolt.

610

This model was made from 1943 to 1950, totaly 5800 was made only in 12 bore.

No engraving, barrels of Swedish Special Steel 70cm long.

 

615, 615AS and 610CS

These models were made from 1949 to 1952, totaly 2150 (incl. EN/LN) was made only in 12 bore. Ejectors on order.

The model has no engraving (615), A-engraving (610AS) or C-engraving (615CS).

Barrels of Swedish Special Steel, 70 cm long.

 

615EN and 615LN

No picture available

These models were made from 1949 to 1952, ejectors on standard.

The 615EN has very limited engraving, 615LN has Lyx-engraving..

Barrels of Swedish NickelSteel Antioxid, 70 cm long.

350/355 serie

This model replaced the 610/615 during 1952 to 1960 pending on model, all models has Purdey slide and some has Greener crossbolt.

350, 350AS and 350CS

No picture available

These models were made from 1952 to 1960, totally 6100 made mostly in 12 bore, only a few in 16 bore and 20 bore.

Barrels of Swedish Special steel, 70 cm length as standard. Ejectors on order.

The model has no engraving (350), A-engraving (350AS) or C-engraving (350CS).

 

350Lyx, and 350Special

No picture available

These models were made from 1952 to 1960, numbers unknown

Barrels of Swedish Nickell-steel Anitioxid, 70 cm length as standard. Ejectors on order.

The model has no engraving (350Special) or Lyx-engraving (350Lyx).

 

350 Extra Lyx

No picture available

This model was made in 5 guns after 1957

Barrels of Swedish Special steel, 67 cm length as standard. Ejectors on order. Engraving to a very high level.

 

1310 serie

This model replaced the 610/615/350/355 around 1960 pending on model, all models has Purdey slide and some models had Greener crossbolt. This was the last great effort from HVA to make a traditional shotgun at a reasonable price.

1310, 1310AS and 1310CS

These models were made from 1959 to 1970, totally 5000 made mostly in 12 bore, only a few in 16 bore and 20 bore.

Barrels of Swedish Special steel, 70 cm length as standard (66cm was made for the danish market). Ejectors on order and Greener crossbolt on order.

The model has no engraving (350), A-engraving (1310AS shown above) or C-engraving (1310CS).

 

1310Special

No picture available

This model was made from 1959 to 1970, numbers included above..

Barrels of Swedish  NickelSteel Antioxid, 70 cm length as standard. Ejectors and Greener crossbolt as standard.

The model has no engraving, close to the Eckermann standard.

 

1310Lyx

No picture available

This model was made from 1959 to 1970, numbers included above..

Barrels of Swedish  NickelSteel Antioxid, 70 cm length as standard. Ejectors and Greener crossbolt as standard.

The model has rich engraving, according to HVA standard for top models.

 

Copyright 2013 © shotguns.se

Last update: 2013-01-17